NBS Source
I'm a manufacturer
Compare variants

Variofold 80 GV (Folding Sliding Wall Hardware)

Verified by manufacturer 3 months ago

16780

Hawa Sliding Solutions AG Variant:
Third party certifications:
  • EPD

    EPD

    Certificate type

Door hardware for all-glass folding walls with panel weights up to 80 kg.

Jump to:
+41 44 787 17 17 Website

Application

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.

Description

Door hardware for all-glass folding walls, for panel weights up to 80 kg. Requires a bottom guide channel, (apart from sets comprising only two panels). Installation of even number of panels recommended by manufacturer.


Features and benefits:

  • Elegant design.
  • Panel width: 400–900 mm.
  • Maximum panel height: 2600 mm.
  • Suitable for door panel thickness of 10–12.7 mm.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Smooth, quiet operation.
  • Minimal stacking space required.
  • Includes a secure locking mechanism.
  • Attached to every other panel is a folding (pivot) door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • An access door equipped with our top pivot may also be added on the opposite side to the folding stack.
  • Compatible for use with sliding doors: Fully tempered monolithic glass (of 10, 12 and 12.7 mm thickness) and fully tempered laminated glass, and fixed doors: Fully tempered monolithic glass (of 12 and 12.7 mm thickness) and fully tempered laminated glass (of 10.8–13 mm thickness).
  • All mechanisms, suspension devices, guides and locks are fully integrated into the aesthetically pleasing suspension and glass retainer profiles.
  • Vertical adjustment (±3 mm).


Components:

Quantities of each component will vary dependent on variant specified, consult manufacturer for details.

  • Four-wheeled trolley M10, with plastic wheels.
  • Four-wheeled trolley M10, with plastic wheels and spacer.
  • Top pivot bearing.
  • Vertically adjustable driver for pivot door.
  • Folding/ pivot door catch, adjustable.
  • Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot (standard).
  • Plastic guide, rattle proof (14 mm), with suspension block.
  • Vertical adjustment key SW 19.
  • Suspension assembly locking wrench SW 10/ 11.
  • Fork spanner SW 22/ 12, pivot door vertical adjustment.

General information

Color

Grey

Finish

Anodized

Chrome

Guidance for specification option:

Dull chromium.

Material

Aluminium

Zinc

Shape

Rectangle

Warranty description

Two year

Uniclass

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Door track and running gear

P21/350 Door track and running gear

Specification data - Door track and running gear

Standard

To EN 1527.

Third-party certification

TÜV Rheinland LGA Products GmbH, Nürnberg, Germany.

Classification grades (minimum)

-

Durability

6.

Door mass

3.

Initial friction

3.

Form

Aluminium, plain anodized, pre-drilled, sliding, stacking, folding running track and bottom guide channel.

Running track

6000 mm.

Cut to size.

Guidance for specification option:

Insert requirements.

Bottom guide channel

6000 mm.

Guidance for specification option:

31 x 28 mm.

Cut to size.

Guidance for specification option:

Insert requirements.

Suspension/ Retainer profile

Aluminium, plain anodized, brushed.

Aluminium, plain anodized, brushed (straight).

Aluminium, un-anodized.

Length

6500 mm.

Cut to size.

Guidance for specification option:

Insert requirements.

Manufacturer guidance

Suspension/ Retainer profile.

Hinges

Zinc alloy, dull chromium finish.

Zinc alloy, dull chromium finish (straight).

Zinc alloy, raw finish.

Locking

Hawa bar bolt lock with retention pin, 17 mm profile cylinder.

Guidance for specification option:

  • On request.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock with retention pin, 22 mm round cylinder

Guidance for specification option:

  • On request.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot.

Guidance for specification option:

  • Standard.
  • Available with floor mounted sleeve or strike plate, insert requirements.

Manufacturer guidance

Various accessories are available, consult manufacturer for details.

Accessories/ Other requirements

Not required.

Additional top lock.

Brush seal for glass suspension and retainer profile.

Cover cap.

Guidance for specification option:

  • Available in dull chromium or raw finish.
  • Insert requirement.

Drilling jig, for hinge retention bolts.

Show more

Manufacturer guidance

Other accessories and spares are also available, consult manufacturer for details.

Maximum width per module

1800 mm.

Panels

Set for two panels.

Sustainability data

Contains Red List materials

No

Country of material origin

Switzerland

Country of product manufacture

Switzerland

Recyclability

Yes

Third party certifications

BIM objects

Platform Compatible Version
Revit
-

1

IFC
-

1

Third party certifications

EPD

EPD

Hawa EPD Glass door gear EN

Literature

CAT_EN_Hawa_Variofold_80_GV

CAT_EN_Hawa_Variofold_80_GV

Similar products from Hawa Sliding Solutions AG

Aperto 60 H (Sliding Wall Partition Gear Hardware)

Aperto 60 H (Sliding Wall Partition Gear Hardware)

Banio 40 GF (Shower Enclosure Hardware)

Banio 40 GF (Shower Enclosure Hardware)

Centerfold 80 GV (Folding Sliding Wall Hardware)

Centerfold 80 GV (Folding Sliding Wall Hardware)

Centerfold 80 H (Folding Sliding Wall Hardware)

Centerfold 80 H (Folding Sliding Wall Hardware)

Concepta 25/ 30/ 40/ 50 (Pivot Sliding Furniture Hardware)

Concepta 25/ 30/ 40/ 50 (Pivot Sliding Furniture Hardware)

Concepta III 25 Pull (Pivot Sliding Furniture Hardware)

Concepta III 25 Pull (Pivot Sliding Furniture Hardware)

Concepta III 25 Push (Pivot Sliding Furniture Hardware)

Concepta III 25 Push (Pivot Sliding Furniture Hardware)

Concepta III 35 Pull (Pivot Sliding Furniture Hardware)

Concepta III 35 Pull (Pivot Sliding Furniture Hardware)

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Concepta III 35 Push (Pivot Sliding Furniture Hardware)

Folding Concepta 25 (Pivot Sliding Furniture Hardware)

Folding Concepta 25 (Pivot Sliding Furniture Hardware)