VISION 8000 EI60 Series INSULATED RISER DOORS

Profab Access’ VISION 8000 EI60 Series range of fire-rated riser doors provides access into tiled jointless plaster and plasterboard walls where access to mechanical and electrical services is required. Specified in commercial, residential and public buildings, the riser doors are supplied with a metal door tray lined with tile backing board, so the chosen cladding can be applied on site delivering the highest standards in fire safety, security and practicality with a visually impacting finish.

Features and benefits:

• Fire rated up to 60 minutes for integrity and insulation (EI60 Specification).
• Visually impacting within an overall design.
• Facade of the riser door can be clad in potentially combustible materials including timber or laminated timber.
• Concealed for a seamless aesthetic finish.
• Maximum cladding build depth of 35 mm.
• Easy to install and lockable.
• Single door (SD) or double door (DD) configurations.
• High performance range, for vertical use with frame and lock options.
• Fully recyclable at end of life.
• Designed to take potentially combustible cladding materials, subject to assessment or small scale testing
• A simple yet secure means of accessing building services through clad walls without affecting the design aesthetic.
• All standard panels are for internal use only and only in areas of normal humidity.

Construction:

• Manufactured to order.
• 1.5 mm frame and 1.2 mm door in electro-galvanized mild steel.
• Factory welded frame to specified sizes.
• Concealed tiled frame (TF)/(TD) tiled door.
• Lined with tile backing: 12 mm glass reinforced gypsum board.
• Maximum build-up of cladding material is 35 mm.
• Insulated mineral wool core.
• 3 point lock (3PL) or 3 point high security lock (3HS).
• The door opens towards the user.
• Concealed load bearing hinges with up to 120 kg capacity.
• A constant grout-width gap is maintained between the door and the frame.
• Rubber gasket around all sides.
• The door is removable if damage occurs or during installation.
• Single door (SD), double door (DD) configurations as standard.
• Fully powder coated frame in matt RAL 9010.

Installation:

Apertures formed in clad jointless plaster or plasterboard walls should be suitably formed and adequately supported to take the additional weight and operating forces exerted during operation.