Compare

webertherm XM panel silicone system (MFD)

Name: webertherm XM panel silicone system (MFD)
Brand: Saint-Gobain Weber
SKU: pTQBkTWgUAX1pt6gSGVvfJ

Verified by manufacturer 4 months ago

Saint-Gobain Weber

Third party certifications:

BBA Agrément Certificate
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type

External wall insulation system with non-combustible insulation board and an enhanced water resistant textured finish

Jump to:

BOS

+44 (0)1525 718877 Website

Application

Suitable for application onto panel substrates, this system uses non-combustible mineral fibre insulation (webertherm MFD) and is finished with webersil TF, a silicone textured finish with enhanced water resistance which is available in over 100 colours.

Use multiple finishes on the same project

This system can be used in conjunction with the webertherm XM panel brick system (MFD) for building designs which require a mix of brick and render finishes.

Description

[Formerly known as webertherm XM FMR024 P]

webertherm XM panel silicone system (MFD) is a traditional multi-layered external wall insulation system ideal for new build projects to improve thermal performance and provide the building with an attractive façade.

This system uses non-combustible mineral fibre insulation and is finished with a silicone textured finish which is available in over 100 colours.

Suitability:

Suitable for use on buildings over 11 metres.

Final façade finish:

Finished with webersil TF silicone textured finish with enhanced water resistance and available in over 100 colours.

Reaction to fire:

A2-s1,d0 reaction to fire classification in accordance with BS EN 13501. Extended application report on request.
Incorporates non-combustible mineral fibre (webertherm MFD) insulation.

Certification & requirements:

BBA approved.
NSAI approved.
Able to satisfy PAS 2030:2019 and PAS 2035:2019 requirements.

General information

Color	- Manufacturer guidance 160 standard colours.
Finish	Silicone Textured Manufacturer guidance webersil TF
Material	Mineral fibre

Uniclass	Ss_25_45_72_28 External wall insulation systemsPrimary
CAWS	M21/20 External wall insulation system . . . . . . M21/210 External wall insulation system

Product range	External wall insulation systems / For panel External wall insulation systems / Reaction to fire: A2-s1,d0

Specification data - External wall insulation systems

Support rails and brackets	-
Boards	-
Material	12 mm minimum thickness cement particle board for steel frame to provide appropriate support (adequate thickness and stiffness) for the webertherm XM EWI system without deflection or edge protrusions.
Insulation	-
Material	MFD.
Adhesive	weberend LAC rapid.
Additional mechanical fixings	- Manufacturer guidance Fixings are dependent on wind loads and pull out strength, please contact Weber for advice.
Fire barriers and stops	-
Material	MFD.
Fixings	Stainless Steel (At 400 mm centres).
Movement joints	-
Form with	- Manufacturer guidance Please contact Weber for bespoke details.
Render carrier or reinforcement	-
Material	Balanced, open weave, alkaline resistant glass fibre meshcloth.
Mesh size	3.5 x 3.5 mm.
Render	-
Application	Can be hand applied or sprayed.
Material	weberend LAC rapid.
Decorative finish	webersil TF.
Colour	- Manufacturer guidance 160 standard colours available.

Density	First 15 mm 160 kg/m³, balance 100 kg/m³.
Thickness range	57.5–207.5 mm.
Roll size	1 x 50 m. Manufacturer guidance Standard Duty Roll Size.
Fire performance:	A2-s1,d0 when classified in accordance with BS EN 13501-1.