Verified by manufacturer 6 days ago
Airtrak IL100 Inline Ventilator
ISO 9001 Quality Management
Certificate type
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.
Inline ventilators for use at the foot or head of vertical or pitched cladding to provide a continuous airgap for ventilation.
Features and benefits:
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Shape | Rectangle |
Length | 1000 mm |
Width | 100 mm 145 mm 180 mm Manufacturer guidanceOverall girth. |
Warranty description | Ten year |
Uniclass | |
CAWS | H62/47 Eaves H65/355 Ventilated eaves – separated grilles/ trays P10/110 Eaves roof ventilators for existing roofs |
Ventilation opening | 25 mm continuous ventilation aperture. |
Colour | Stainless steel. |
Airtrak CF ClipFast fixing clips | Not required. Airtrak CF ClipFast clips, stainless steel. Guidance for specification option: 70 x 60 mm, 0.6 mm thickness. Airtrak CF ClipFast clips, copper. Guidance for specification option: 70 x 60 mm, 0.5 mm thickness. Manufacturer guidanceFixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres. |
Grade | 304. |
Dimensions | 1000 x 100 mm. Guidance for specification option: Unit length x overall girth. Downstand: 75 mm. |
Type | Standard. |
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Stainless steel Glass Reinforced Plastic (GRP) Guidance for specification option: Insect mesh. |
Recyclability | Recyclable at end of life |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 50 % |
Expected Life | 30 year |
AIRTRAK® CL Cladding Ventilator - Roof Ventilation System
AIRTRAK® CS Comb Strip - Roof Ventilation System
AIRTRAK® CV Cheek Ventilator - Roof Ventilation System
AIRTRAK® LB Layboard Ventilators - Roof Ventilation System
AIRTRAK® MV Mansard Ventilators - Roof Ventilation System
AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System
AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System
AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System