Verified by manufacturer 6 days ago
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
Traditional double triangle tie for securing two leaves of a cavity wall to each other, allowing them to act as one structurally.
Traditional double triangle tie for securing two leaves of a cavity wall to each other, allowing them to act as one structurally.
Features and benefits:
Type 2 versions also available (shorter; specified separately).
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 304. |
Length | 275 mm 300 mm |
Uniclass | |
CAWS | F30/25 Cavity wall ties used with partial fill insulation F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/26 Wall ties F30/24 Cavity wall ties F30/214 Cavity wall ties |
Standard | To BS EN 845-1. |
Tie type | PD 6697 Type 3 (Masonry – basic).Guidance for specification option: Traditional double triangle, general-purpose wall tie used in small commercial buildings and domestic properties. Suitable for buildings with a maximum height of 15 m and cavity widths from 0–150 mm. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. |
Material | Grade 304 stainless steel. |
Length | 275 mm.Guidance for specification option: Cavity: 126–150 mm. 300 mm.Guidance for specification option: Cavity: 151–175 mm. Manufacturer guidanceShorter versions can be specified (separately) under Type 2 - General Purpose Wall Ties. Supplied in boxes of 250. |
End types | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Design embedment length (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Movement | Manufacturer's standard. |
Additional requirements | |
Mortar joint thickness (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Resistance to water crossing cavity | Resistant (multidrip feature). |
Slope tolerance | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Compressive load capacity | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Tensile load capacity | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Dynamic stiffness | Type B. |
Tie-mounted insulation retaining clips | ECO clips.Guidance for specification option: Universal 80 mm-diameter insulation clip made using less plastic for reduced environmental impact. Supplied in bags of 250 or 50. Not required. |
Third party accreditation | UKCA marked. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
General Purpose Wall Ties - Type 2 - Cavity Tie
Heavy Duty Wall Ties - Type 1 - Cavity Tie
High Movement Timber Frame Ties - Type 7 - V62
Housing Wall Ties - Type 4 Light Duty - Cavity Tie
Low Thermal Conductivity Wall Ties - Helical Cavity Tie
Remedial Wall Tie - Wavy Tail Ties
Timber Frame Ties - Type 6 - V61
Two Part Wall Ties - Cavity Tie
Universal Insulation Clips (ECO) - For Use With Movement Ties