NBS Source
I'm a manufacturer

Premcrete Hydroprufe 6000 - Flexible Hydrocarbon Resistant Membrane

Verified by manufacturer 7 months ago

Premcrete

Flexible hydrocarbon resistant membrane.

Jump to:
+44 (0) 23 80276166 Website

Application

HYDRORPUFE 6000 should be loose laid to the prepared sub-base, taking special care to ensure the membrane is not punctured during the installation phase. Adjacent sheets of membrane should be lapped by 150 mm. HCR Butyl Tape is used between the joints and then HCR Foil Girth Tape should be used to over lap the joint.

Description

HYDROPRUFE 6000 is a high-performance high density polythene membrane which is suitable for use on brownfield sites that require protection from dangerous contaminants and ground gases.

HYDROPRUFE 6000 has outstanding chemical resistance and mechanical properties, making it suitable for use where high levels of total petroleum hydrocarbons are present.

General information

Color

Black

Finish

Matt

Material

Polyethylene

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Uniclass

Pr_25_57_65_60 Plastics sheetsPrimary

CAWS

D21/350 Gas-retardant membrane

D21/38 Gas-retardant membranes

J40/120 Loose-laid plastics or rubber sheet damp-proofing

J40/130 Loose-laid plastics or rubber sheet oversite damp-proofing

J40/140 Loose-laid plastics or rubber sheet gas-retardant membranes

J40/20 Loose-laid plastics or rubber sheet damp-proofing

J40/30 Loose-laid plastics or rubber sheet oversite damp-proofing

J40/35 Loose-laid plastics or rubber gas-retardant membranes

Product range

Gas Membranes

Specification data - Plastics sheets

Material

High-density polyethylene (PE-HD).

Purpose

Hydrocarbon and gas-resistant membrane/ damp proof membrane.

Standard

BS EN 14414.

Performance characteristics

-

Tensile strength (minimum)

>850 N/50 mm (to BS EN 12311-2).

Physical properties

-

Colour

Black.

Dimensions

-

Thickness (minimum)

1 mm.

1.5 mm.

Width (minimum)

2.5 m.

Roll length (minimum)

35 m.

Puncture resistance

3.2 kN (to BS EN 12236).

Tear strength

140 N.

Density

0.95 g/cm³.

Literature

Hydroprufe 6000 TDS

Hydroprufe 6000 TDS

Similar products from Premcrete

Premcrete Combi-seal

Premcrete Combi-seal

Premcrete Combiseal Plus - VOC-resistant Waterproof Membrane

Premcrete Combiseal Plus - VOC-resistant Waterproof Membrane

Premcrete Hydroprufe 9000 - Gas Resistant Damp-Proof Membrane

Premcrete Hydroprufe 9000 - Gas Resistant Damp-Proof Membrane

Premcrete Hydroprufe DPC - Co-Polymer Damp-proof Course

Premcrete Hydroprufe DPC - Co-Polymer Damp-proof Course

Premcrete Hydroprufe DPM - High Performance Damp-proof Membrane

Premcrete Hydroprufe DPM - High Performance Damp-proof Membrane

Premcrete Maxiprufe Plus - Waterproof Membrane

Premcrete Maxiprufe Plus - Waterproof Membrane