Compare

Resin Flooring System Resuflor Topcoat Profile

Name: Resin Flooring System Resuflor Topcoat Profile
Brand: Sherwin-Williams
SKU: q3ixKZrGVQRFFkBua89gSn

Verified by manufacturer 4 months ago

Sherwin-Williams

Third party certifications:

ISO 9001 Quality Management
Certificate type

High build epoxy flooring coating system with a light, non-slip texture.

Jump to:

+44 (0)1204 521771 Website

Application

Epoxy flooring coating system suitable for use in:

Food processing and beverage areas.
Chemical plant rooms.
Engineering workshops.
Automotive and aviation areas.
Factory units.
Warehouses.
Suitable for all demarcation and walkways.

Description

A high build epoxy resin system with a light non-slip texture achieved by adding an aggregate to the mix which stays suspended whilst the product is installed for a consistent finish. Applied by roller and paint brush, the system is low odour and provides a textured gloss coloured finish at approximately 500 micrometers thickness, which is suitable for all areas of industry where a hard-wearing non-slip and chemically resistant floor coating is required.

Features and benefits:

High build finish.
Non-slip performance.
Solvent-free.
Hygienic and easily cleaned.
Good colour stability.
Excellent slip resistance with the inclusion of selected aggregates.
High gloss finish.
Available in a wide range of colours.

General information

Color	Black Blue Green Grey Red White Yellow Other Show more
Finish	Gloss Guidance for specification option: High gloss.
Material	Epoxy resin Resin Epoxy
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Ss_30_42_54_75 Resin flooring systemsPrimary
CAWS	M12/10 Resin flooring M12/110 Resin flooring

Specification data - Resin flooring systems

Substrate	-
Testing	Moisture content to BS 8204.
Preparation	Preparation of existing substrates. Guidance for specification option: Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechanical damage, pitting and cracks.
Primer	Not required. Resuseal WB clear. Guidance for specification option: Optional. Resin coating primers.
Resin flooring	Resucoat HB . Guidance for specification option: Base coat. Resucoat HB with aggregate mix. Guidance for specification option: Top coat. Resin floor coatings. Floor seals. High-build floor coatings.
Execution	Workmanship. Application of primers. Surface abrading and polishing. Applying surface sealers. Applying surface finishes.

System thickness	0.5 mm.
Reaction to fire (to EN 13501-1)	Bfl-s1.
Curing time	12—16 hours. Guidance for specification option: (at 20ºC) Light traffic. 48—72 hours. Guidance for specification option: (at 20ºC) Designed traffic. ≤7 days. Guidance for specification option: (at 20ºC) Full cure traffic.
Abrasion resistance	To ASTM D4060-14, 134.7 mg. Guidance for specification option: Loss/ 1000 cycles.
CompressiveStrength	To BS EN ISO 604, 9.6 MPa.
TensileStrength	To BS EN ISO 527-2, 7.5 MPa.
Flexural strength	To BS EN 13892-8, 3.2 N/mm².
Bond strength	To BS EN 13892, >3 N/mm². Guidance for specification option: Substrate failure.
Temperature resistance	45°C. Manufacturer guidance Tolerant of temperatures up to:
Chemical resistance	Good.
UV stabilization	No.
Slip resistance	To BS 7976-2, >36.
Colour	Red. Light Grey. Dark Grey. Blue. Green. Black. White. Show more
Finish:	High gloss.
Performance	- Manufacturer guidance Slip resistance. Durability. Water and vapour resistance. Compliance with performance requirements. Compliance with performance requirements.
Testing	- Manufacturer guidance Testing slip resistance. Testing bond strength. Verification of performance.