Verified by manufacturer 2 months ago
ISO 9001 Quality Management
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
A water based epoxy resin floor system for application as an industrial floor coating at a thickness of around 100 microns.
Suitable for producing a tough seamless, hygienic floor finish. AquArmor™ S can act as a curing membrane to increase hardness of concrete by allowing full hydration of cement and can be applied to new concrete, seven days after being poured.
Can be used in the following scenarios:
Resuflor Topseal is a water based epoxy resin floor system for application as an industrial floor coating at a thickness of around 100 micrometres. A sheen finish will be provided which can be clear or coloured and is suitable for all areas of industry where a hard wearing floor coating is required.
System includes:
Features and benefits:
Color | Clear Grey Guidance for specification option: Stirling grey or flint grey. Red Guidance for specification option: Salsa red. |
Finish | Anti-slip Satin Smooth |
Material | Epoxy resin Resin Water-based Water-borne |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Substrate | |
Testing | Moisture content to BS 8204. |
Preparation | Preparation of existing substrates.Guidance for specification option: Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechanical damage, pitting and cracks. Preparation of new substrates. |
Primer | Not required.Optional.Resin coating primers. |
Movement joints | |
Type | Resin flooring strip movement joints. |
Execution | Workmanship.Application of primers.Applying surface sealers.Applying surface finishes. |
System thickness | 0.1 mm. |
Hardness | To BS EN ISO 1522: 83. Manufacturer guidancePendulum hardness. |
Abrasion resistance | To ASTM D4060-14, 101.5 mg. Guidance for specification option: Loss/1000 cycles. |
Tensile strength (to EN ISO 527) | To BS EN ISO 527-2, 26 MPa. |
Bond strength | To EN 13892-8, >3 N/mm². Guidance for specification option: Substrate failure. |
Temperature resistance | Up to 45⁰C. |
Chemical resistance | Good. |
VOC content | 10 g/L. |
Coverage | 60 m². |
Cure time | 8 hours to 8 days. Guidance for specification option: Depends on traffic conditions and temperature. |
Application temperature | 10—25°C. Guidance for specification option: An equilibrium relative humidity (ERH) <90%. |
UV stabilization | No. |
Colour | Clear. Stirling grey. Flint grey. Salsa red. |
Performance | Manufacturer guidance
|
Testing | Manufacturer guidance
|
Country of product manufacture | United Kingdom |
Resin Flooring System Acrydur™ ID
Resin Flooring System Acrydur™ RA
Resin Flooring System Acrydur™ TD
Resin Flooring System Acrydur™ Topfloor SL
Resin Flooring System Elladur Topcoat
Resin Flooring System Elladur™ Deco Flake SF
Resin Flooring System Elladur™ Deco Flake SL
Resin Flooring System Elladur™ Deco Quartz SF
Resin Flooring System FasTop SL45 SRA
Resin Flooring System FasTop® Multi DP