NBS Source
I'm a manufacturer

Acoustic Ceiling and Wall - Isocheck Isowave 23 - High Mass Acoustic Wall Panel

Verified by manufacturer 5 months ago

Isomass Ltd

Airborne and flanking sound improvement system for ceilings and walls.

Jump to:
+44 (0)330 175 8228 Website

Application

  • Incorporated within a ceiling or wall construction.
  • Isocheck Isowave 23 system is for the treatment of excessive flanking sound that bypasses a separating floor via lightweight structural walls.
  • Particularly suitable for resolving separating floor sound test failures which often occur with a timber structural separating floor within a 1950s to 1990s clinker/lightweight block facade inner skin.
  • Used for a high performance light weight wall construction that is intended to separate two dwellings.

Description

Isocheck Isowave 23 consists of a 10 mm Isowave acoustic foam measured to BS 4443 and BS EN ISO 845:2009 bonded to 12.5 mm high density, square edged fibre-reinforced (30 minute fire rated) gypsum board. It reduces unwanted flanking noise in order to comply with Approved Document E 2003 and subsequent amendments.


Features and benefits:

  • Reduces direct airborne sound transmission and unwanted flanking noise.
  • Excellent absorber with high damping characteristics when bonded to an acoustically reflective stiff surface.
  • Complies with requirements of EU Regulation No 2037/2000 for ozone depletion and offers good thermal properties.
  • NHBC tested.

General information

Color

Ivory

Black

Finish

Textured

Material

Gypsum

Shape

Rectangle

Length

1197 mm

Width

597 mm

Height

22.5 mm

Warranty description

25 year

Uniclass

Pr_25_57_06_71 Resilient layer insulationPrimary
Pr_25_71_35_29 Fibre-reinforced gypsum boards

CAWS

K11/27 Acoustic separating floor system

K11/275 Acoustic separating floor system

Specification data - Resilient layer insulation

Material

Isowave acoustic foam bonded to fibre-reinforced gypsum board.

Density

1300 kg/m³ (board); <90 kg/m³ (foam).

Thickness

22.5 mm.

Guidance for specification option:

  • Resilient layer: 10 mm.
  • 12.5 mm thick high density, square edged fibre-reinforced gypsum board.

Fire performance

30 minutes.

Guidance for specification option:

Isowave performs under the following classifications:

  • BS476-7 Fire Propagation Index <12.
  • BS476-6 Surface Spread of Flame Class 1.
  • Building Regulations Paragraph A13 (b) Class O.

Manufacturer guidance

Fire protection (single layer).

Sound insulation rating

Guidance for specification option:

Sound performance: aw 0.26.

Manufacturer guidance

Complies with Approved Document E of the Building Regulations when used as part of an Isomass design (design service available FOC).

Overall size

1197 x 597 x 22.5 mm.

Edges

Square.

Weight

17.3 kg/m².

Sustainability data

Contains Red List materials

No

Country of material origin

United States

Country of product manufacture

United Kingdom

Material

Gypsum

Recyclability

yes

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

60 %

Literature

Isocheck Isowave 23 for Ceilings - Data Sheet v1.14

Isocheck Isowave 23 for Ceilings - Data Sheet v1.14

Isocheck Isowave 23 for Walls - Data Sheet v2.14

Isocheck Isowave 23 for Walls - Data Sheet v2.14

Typical Flanking Wall Upgrade - Isowave 23

Typical Flanking Wall Upgrade - Isowave 23

Typical Upgrade to Form Separating Wall - Timber - Isowave 23

Typical Upgrade to Form Separating Wall - Timber - Isowave 23

Typical Upgrade to form Separating Wall - Brick - Isowave 23

Typical Upgrade to form Separating Wall - Brick - Isowave 23